Skip to main content

Prices are shown including VAT for Austria. For other EU countries, your country's tax rate will be applied during checkout instead. For orders outside of the EU, the 20% tax will be removed during checkout.

Next parcel batch:  Dec 10. No order fulfillment possible from Oct 15 to Dec 6.
Orders to the USA from 2026 Sep 1 onwards can be shipped with "ship by weight" (Austrian Post → USPS) again, with duties pre-paid.

Next K-Deo production batch: ~December 2026

Custom Gamecube controller

Kadano

€156,00
(1 review) Write a Review
SKU:
GCC-2018JP
Weight:
400.00 Grams
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

This listing is intended to make ordering a custom controller from me easier, faster and more streamlined. For highly custom requests, or if you want modifications that are not included in this listing yet, you can still send order requests by sending an email in the format specified on my website, after which I'll write you an invoice accordingly, which can be paid by bank transfer or Wise transfer.

With custom controllers being fully tuned to your specific choices rather than pre-built, it generally takes 1-2 weeks from the order date until I can get your controller finished and shipped. In rare cases under busy times or when certain parts required for your order are out of stock, up to 1 month of processing time might be needed. 
If the expected processing time is more than the standard 2 weeks, I will contact you and ask whether that's fine with you. When I can't get the controller built and shipped within 1 month of the date of order, you can message / email me requesting a full refund (which is always granted unless the controller is already halfway done). 

FAQ about my custom Gamecube controllers is at the bottom.

Front shell options (basic): the regular octagon gate has no modifications.
Sparkplates have the A2a version (straight octants; refer to the diagram below) of my hybrid gate notches, which prioritizes full access to all the different diagonal angles, at the expense of ease and speed of hitting the specific notch angles (min/max wavedash, up-B / air dodge and shield drop angles). Also, Sparkplates have slightly worse fit with the ABXY buttons and the back shell than original front shells. They are a good budget option for trying notches for the first time.
Hand-filed notches are available in different shapes that have different strengths and weaknesses, respectively – shown below. If you are unsure which one to choose, go with A2b. Combinations of the different shapes are also possible (for example, A2a top half / A2b on ESE & WSW / A2c on SSE & SSW, which is usually ideal altogether for Melee). If you want a combination of different notch shapes, please specify that in the "shell options" text input field or as an order comment. All shapes are the same price, regardless of how they are combined.

Front shell notches: optional quality upgrades: By default, I advise going for the "standard" version, which is 50% discounted compared to my list prices but only slightly less perfect in terms of symmetry and finishing (as getting those to be perfect makes the whole process take about twice as long). If budget is less of a concern and you really want the notches to be highly symmetrical and ideally shaped, the higher tier finishing option are still the (slightly) better choice though.

Shell options: If you prefer a certain shell condition, please specify in this field. examples: "as little yellowing as possible" / "fewer scratches or dents, some yellowing is okay". If you want a specific combination of notch shapes (for example, A2a in the top half / A2c in the bottom half – a fairly common request), please write that in this field or as an order comment. If you selected DSDI notches, please specify the character for the DSDI notches to be tuned for here.

ABXYS button options: Transparent buttons are oil-polished by the 3D print house by default. Black buttons are not polished by default and have a somewhat dull look, but you can choose the option of having me hand-polish them for you.
Below is a photo that shows the difference, with the hand-polished black buttons inserted into the front shell and the non-polished black buttons positioned next to them.


When you select "transparent slanted & rounded ABXYS buttons with custom color backgrounds", the default backgrounds are: dark blue (XYS) + green (A) + red (B). If you want different colors, please specify in this text input field. All available standard colors are shown in the photo below; from left to right: white, pink, magenta, purple, dark blue, light blue, yellow, red, green. Limited edition backgrounds are available on request / through a separate listing later on.

Additionally, if you want only certain slanted buttons to be inserted (for example, ABXY, with the original start button kept), please also write that in this field.

ABXY PTFE tape centering: With this optional upgrade, I attach thin strips of PTFE tape to the internal side walls of the front shell that the buttons slide along. This stabilizes the buttons, minimizes sideways wobble and also drastically reduces wear on both the buttons and the front shell side walls.
Due to the stock glue of PTFE tape not being strong enough to withstand hand sweat and oils eventually creeping in there and shifting them out of position, I always attach the tape with UV light activated cyanoacrylate, which makes for a reliable long-term connection.
Due to the strips being optimized and tested for the individual button set you chose (including the OEM buttons, if they are selected to be also included), fit with other button sets can't be guaranteed. Also, the process of securely attaching them and testing the fit to be ideal with the smallest amount of play is rather time-consuming, which is why this upgrade is relatively expensive.

Trigger mechanical switch: custom selection: the default mouse click switch is HCNHK black (105gf) and the default keyboard switch is Kailh Navy (68gf). If you prefer different switches, please specify them in this field.
Can be different for L and R. Other available mouse-click switches:
• 50gf Kailh blue
• 53gf HCNHK blue
• 55gf Omron blue [D2LS-21]
• 80gf HCNHK beige
• 120gf Omron white [D2LS-11]
Other available keyboard switches:
clicky:
• 52gf Robin
• 57gf White
• 58gf Light Blue
• 58gf Jade
tactile:
• 47gf Brown
• 65gf Orange
linear:
• 48gf Red
• 65gf Yellow

Custom Phob calibration: by default, all notches are tuned to 0.32 offsets, diagonals to 0.70, with the latest PhobGCC software installed (currently 0.31). Snapback is eliminated using negative filters. Waveshaping and other filters are kept at 0 / default values. If you want a specific button remapping or a different stick tuning, please specify so in this field.

C-Pad installation: C-Pad is a mod developed by Rana Labs. It replaces the analog inputs of the C-stick with 4 digital buttons. Due to the lower height of the buttons and the small distance between them, despite the digital nature of the inputs, accidentally inputting a different direction than intended is still possible, though. 
For this reason, I created an optional extension set that makes the top of the buttons a bit higher, more rounded and more flared out, so that the 4 directions can be told apart more easily and are a bit closer to the height of the C-stick, with the tallest point of each button extension being outward from the screw attachment point (see below on the right).

FAQ

Why should I buy a modded controller from you rather than from someone else? Why are your controllers so expensive?
Every modder puts their emphasis on other aspects, and depending on which aspects you value more, I might not be the ideal modder for you. 
My main priorities are technical reliability, ergonomics, comfort, convenience for disassembly & cleaning, hygiene and satisfying build quality. I'm also the person who invented a large percentage of the controller mods in common use today, and by supporting me through commissions, you also support future developments of improved controller modifications (my focus in the last few years has been mainly on reliability and ergonomic improvements).
The work I put into controllers to ensure the standards above takes time. It's not possible to speed up the process of building a controller optimizing for the aspects mentioned above without compromising any of them.

For example, I could stop rigorously cleaning soldering flux residue after every step of soldering, which would save some time – but it would also mean that when you open your controller later on, say for cleaning or parts swapping, there's a chance that you'd accidentally spread some flux residue to areas where it will cause problems, such as the ABXY contact pads on the mainboard, just by handling the mainboard with your fingers. 

Similarly, in order to prevent the magnet mounts from coming loose – which results in the corresponding analog axis completely stopping to work, making gameplay impossible – I drill precise micro holes into the stickbox rail pegs (see pre-drilled option photos here). Doing so takes much longer than simply gluing them on, but it also means that you don't have to worry that they might ever come loose (as has happened to many high- and top-level players in the past and is one of the most common reasons for "a Phob suddenly breaking").

When you buy a controller from me that's not brand new, it's always deep-cleaned by me for hygiene reasons (fully disassembled, with all plastic parts washed with dish soap and a brush), which of course also takes time and needs to be factored into the price.

Depending on the specifications chosen, building a Phob usually takes me between 4 and 20 hours of work. Customers who expect perfection are usually satisfied with my work and understand that reaching this level of controller performance and optimization takes more time and thus money. 

If you prioritize keeping to a smaller budget and don't mind if perhaps something with it goes wrong every few months or so, or if you are not playing Melee (or other games that Gamecube controllers are suitable for) enough to warrant spending the money on a controller from me, there is nothing wrong with opting for a more budget-oriented Phob builder. 

Can I get a paracord cable?
Not from me. Paracord cables are strictly less sturdy than original PVC coated cables and much more likely to break and cause severe problems (even mainboard or console damage being possible). My focus is on reliability, which I don't want to compromise for aesthetics. 

Are all controllers built by yourself or might my controller be worked on by someone else?
In order to maintain the consistent and continually improving level of performance and build quality my customers have come to expect, I only work on custom controller builds by myself and don't hire any staff. This can make for slower processing at times (up to 4-6 weeks when many orders come in), but I don't prioritize profit over every single of my customers getting the same level of attention and care. 

I want to buy your controller or other products, but you don't ship to my country. What can I do?

I'm able to ship worldwide with very few exceptions. If shipping to your country is not implemented, chances are that I just wasn't aware of it or the fact that there might be demand for my products from there. Please send me a message through the contact form and tell me which country you want me to enable for shipping. 

Should I buy a controller through this listing or through your website's ordering guide (by sending an email in the format specified there)?
If the controller edition you want as well as all the mods you want are included in this web shop listing, ordering this way is usually more convenient, faster and more efficient. In case you want a controller color that's not currently listed in stock here, or highly specific mods not listed here yet, sending an email is likely the better way to go about it. 

Can I send in my own controller to save some money?
You can send in your own controller, but please be aware that the controller costs account for typically 30-80€ of the total price (depending on color and condition chosen), and sending the controller in will cost you around 12-30€ depending on where you live. Also, particularly with controllers that have broken, dirty or compromised parts inside, it can actually end up costing slightly more in total as handling that as well as the additional correspondence may take more time than if I had worked with a controller from my stock. (An example for this would be a T1 or T2 controller with broken front shell screw posts with sentimental value, where you really want me to keep and fix the front shell or certain other parts – I'd have to bill the additional tracked time to make it work as requested by the hour, at my standard rate of currently 50€ per hour (plus VAT if applicable).)

1 Review Hide Reviews Show Reviews

  • 5
    Great controller and service!

    Posted by Tage on 25-11-10

    From start to finish Kadano was helpful and kind. He also provided easy to digest information about different solutions, mods and the parts he had available. My controller looked and felt great. On top of this the internal work of the controller looked very solid and professional. I had some issues with the controller, caused by an incompatible adapter. But Kadano was quick to point out the most probable issue. Fantastic after-order support! All in all, a seller I would highly recommend to anyone looking for a Phob or modded gamecube controller. My first choice for gamecube controllers any day!